Raymarine AIS700 Class B AIS with Splitter

Model: E70476

Full transmit and receive AIS for enhanced situational awareness and safety

Latest SO-TDMA networking for longer range and faster performance

Built-in antenna splitter simplifies installation with existing VHF radio antenna

NMEA2000, NMEA0183, PC and SeaTalkng Compatible

Software or hardware switchable Silent Mode for enhanced security when needed

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.

Specifications

Evironmental

Operating temperature -15°C to +55°C

Storage temperature -20°C to +75°C

Water ingress IPX6 and IPX7

Humidity Up to 93% @ 40°C

Power

Power Supply 12v and 24 nominal

Power Consumption <3W

<3W 3A

Load Equivalency Number 1 LEN

RF Specifications

DSC Receiver Implemented by time sharing with one TDMA receiver

Receiver 1 band 156.025 MHz to 162.025 MHz (in 25KHz steps)

Receiver 2 band 156.025 MHz to 162.025 MHz (in 25KHz steps)

Transmitter band 156.025 MHz to 162.025 MHz (in 25KHz steps)

Transmitter specification To meet IEC 62287-2 relevant sections

Receiver specification To meet IEC 62287-2 relevant sections

Transceiver specification To meet IEC 62287-2 relevant sections

GPS receiver u-blox MAX-M8W

GPS receiver channels 72 channels

GPS Cold start acquisition time 26s nominal

Positional source GPS & GLONASS

AIS performance 5W SOTDMA

External Connection

VHF antenna connector type SO-239 co-axial

VHF radio connector type SO-239 co-axial

GNSS antenna connector 50 Ohm TNC co-axial

NMEA2000 DeviceNet male

USB Micro-B

External interface isolation NMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification.

NMEA0183 interface 1 (MFD connection) NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS.

NMEA0183 interface 2 (NMEA0183 instrument connection) NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate

USB interface (PC connection) Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud

What’s in the Box:

AIS700 Class B AIS Transceiver with built-in VHF antenna splitter

GNSS (GPS) Antenna

Power / data cable 2m (6.56 ft)

VHF Radio cable 1m (3.28 ft)

DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft)

GNSS antenna gasket

GNSS antenna pole mount

Unit fixings (4 x No.8×19 self tapping screws)

M5 nut and washer (grounding)

Documentation kit

GNSS antenna fixings (3 x M3x40 stud and thumb nut)

Software CD